Pre-Cut CZ Purlin Machine

Pre-Cut & Pre-Punch C Z Purlin Roll Forming Machine (NTK-CZ-300AQ)

NOVOTEK manufactured C Z Purlin making machine, also called fast change C Purlin Roll Forming Machine or C & Z channel Interchangeable Rolling Machine, can be used to produce both C Purlin and Z Purlin with various sizes, in different thickness, and with punch on web and flange side.

Pre-Punch C Z Steel Profile Machine

Introduction:

Our standard fully automatic pre-punching and pre cutting C Z purlin machine, including 2 sets of PLC controlled lateral movement punching unit. By chain or gearbox drive, its speed can up to 35m/min. 

  1. Raw material: GI or black sheets, 1.5-3.0mm

  2. Product size: C profile 80-300mm & Z Profile 120-300mm (also we have NTK-CZ-400 available)

  3. Machine speed: Max. 30 m/min (by servo motor driven)

Steel Purlin Roll Forming Machine Main Components :

Uncoiler

  1. Type: Mechanical Uncoiler, Hydraulic Uncoiler (with or without coil car)

  2. Load capacity: 6T

Main Machine of Pre-cut Purlin Machine

  1. Roller material: GCr15 with heat treatment, polishing and galvanizing.

  2. Main motor: normal electrical motor or servo motor drive

  3. CZ Interchange: interchange between C and Z purlins controlled by PLC and set through touch panel.

  4. Size Change: size change also controlled by PLC and set through touch panel, continuously adjustable.

Pre- Punching & Pre- Cutting

  1. Punching unit: 2 sets (can be added)

  2. Pre-cut: 1 set

  3. Cutting length, cutting pieces, and punching are controlled by PLC.

As the leading and biggest C Z Purlin Machine manufacturer in China, on average we have delivered 180-200 sets Purlin Machines each year in the past 5 years, also we are the only factory to supply fully automatic type in China.

 

Spezifikation

Technische Spezifikation der NTK-CZ-300AQ Pfettenmaschine

Rohstoffe Typ Verzinktes Blech, schwarzes Blech
Dicke 1,5-3,0 mm (1,2-3,2 mm)
C Pfettengröße Steg x Flansch x Lippe 80-300/ 30-80/ 10-20
Z Pfettengröße Steg x Flansch x Lippe 120-300/ 30-80/ 10-20

Leistung
Geschwindigkeit max. 30 m/min (durch Servomotor angetrieben)
C & Z Austausch SPS-Steuerung, vollautomatisch
Größenänderung SPS-Steuerung, vollautomatisch
Abwickler Typ Mechanisch oder hydraulisch
Kapazität 6 T

Hauptmaschine
Hauptrollenstation 18
Hauptantrieb Elektromotor oder Servomotor
Übertragungsart Kette oder Getriebe

Stanzen & Schneiden
Stanzstelle Jede Position auf dem Blatt
Stanztyp Vorstanzen
Schneidetyp Vorschneider

Video

Anfrage

Jetzt bestellen

Verwandte Produkte

Produktkatalog
Willkommen bei Novotek Machinery
Vielen Dank für Ihre Anfrage. Sie können innerhalb von 24 Stunden mit einer Antwort rechnen.