Mini Coil Slitting Machine

The mini coil slitting line is designed to longitudinal slit the coil into required pieces and recoiling. 

Brief Introduction:

The NTK-(0.4-1mm) x1300 mini coli slitting line is designed to longitudinal slit the coil into required pieces and recoiling.

Components Detail Introduction

1. Hydraulic De-Coiler

1.      Hydraulic expand and shrink to tight the inner hole of steel coils.

2.      Inner diameter: Φ480-520, width: 500 mm

3.      10T with simple supporting stand, without coil car.

4.      Fixed the coil to active uncoil, with brake.  

5.      The hydraulic expand and shrink de-coiler is driven by hydraulic, to tight the inner hole of steel coil. 

2.Slitting Machine

  1. Specification of blades: Φ340×200×15; material: Cr12
  2. Electric motor: 7.5KW frequency conversion control motor to control the speed. Control mode is frequency control.
  3. Reducer: cycloidal reducer
  4. Slitting speed: 20m/min.
  5. It equips the side guide device, to achieve positioning strip and stop the jumping of strip. Improve the accuracy of slitting. It can shear actively or passively. To achieve different strip thickness accuracy requirements of slitting.
  6. Technical Parameters:
  1. Power

7.5KW

  1. Shaft

Φ70

  1. Material of shaft

40Cr

  1. Blade specification

Φ340×Φ200×10

  1. Material of blade

Cr12

 

 

3. Tension Stand

  1. The frame welded by steel plates.
  2. Consist of base, pre-dividing shaft, bracket, press shaft, hydraulic damp device and hydraulic shaft lifting the press down device. Supporting slices, spacers and etc.
  3. Function: It also have the side guide device for finished strips and prevent them from jumping and improve the recoiler quality. To establishing a stretching force with recoilier, to make sure the even quality and tight of steel coils after recoiling.

4.Recoiler

  1. Structure: hydraulic expand and shrink model.
  2. Capacity: 10T with simple supporting stand
  3. Motor: 7.5KW
  4. Speed: 20m/min
  5. Overall steel plate cantilever structure
  6. Function: It works with the finished steel strips after first pre-dividing and second dividing to insure the even and tight quality of recoiler. Recoiling tension and speed are adjustable.

 

تخصيص

فيديو

سؤال

اطلب الان

منتجات ذات صله

بيان المنتج
مرحبًا بكم في ماكينات Novotek
شكرا لاستفسارك ، قد تتوقع الرد في غضون 24 ساعة.